Ebyte K62-DL20 User Manual page 31

Chengdu Ebyte Electronic Technology Co.,Ltd.
(2) If the "CH340 driver" is not installed, enter the following steps. If already installed, skip this step .
Open the downloaded compressed package and decompress the folder (as shown in Figure 4-3 and Figure 4-4 below) →
find the compressed package with the words "CH340" and decompress it → double-click and click "SETUP.EXE" →
install → After the installation is complete, it will prompt " Driver installed successfully" → Finish
(3) Run the configuration software of "Interconnect Industrial Network IO Setting Tool.exe". (This setting tool supports:
Chinese and English)
Open the downloaded zip file and decompress the file → find and double-click the "Pair Transmission Industrial
Network IO Setting Tool.exe" to run the configuration software → If the operation is successful, the installation is
successful . (If opening fails, you will need to go to the next step.)
Copyright ©2012–2021，Chengdu Ebyte Electronic Technology Co.,Ltd.
Figure 4-1 Figure 4-2
Figure 4-3 Figure 4-4
K62-DL20 User Manual
30