Indicator Light Description - Ebyte K62-DL20 User Manual

Chengdu Ebyte Electronic Technology Co.,Ltd.
on interface
8 AO1
9 GND
10 AO2
11 GND
12 AO3
13 GND
14 AO4
15 GND
16
17 SFR
18 SIM

1.3.3 Indicator light description

(1) LED light indication on the transmitting (collecting) end, as shown.
Copyright ©2012–2021，Chengdu Ebyte Electronic Technology Co.,Ltd.
Analog input 1
0/4～20mA analog signal output channel 1.
channel
input negative Input negative (0V).
Analog input 2
0/4～20mA analog signal output channel 2.
channels
input negative Input negative (0V).
Analog input 3
0/4～20mA analog signal output channel 3.
channels
input negative Input negative (0V).
Analog input 4
0/4～20mA analog signal output channel 4.
channels
input negative Input negative (0V).
without Leave it in the air, do not connect.
Press and hold for 3 seconds to restore the factory settings (Set
reset
Factory Reset) (indicated by the status of the RUN light).
SIM card slot Insert a data IoT card and a phone card with a data plan.
Table 1-5 Function table of analog input module
Figure 1-5
K62-DL20 User Manual
12