Reading And Changing The Basic Parameters Of The Product; Product Hardware Connection And Com Port Selection - Ebyte K62-DL20 User Manual

Chengdu Ebyte Electronic Technology Co.,Ltd. K62-DL20 User Manual
solve abnormal situations such as errors and misoperations when users configure information.
Figure 4-6 Introduction to the configuration software tool interface

4.2 Reading and changing the basic parameters of the product

This chapter mainly introduces how to read product device attributes: device type, firmware version, product unique
identification code, changing serial port parameters, etc. The detailed steps are as follows

4.2.1 Product hardware connection and COM port selection

(1) Wiring connection: Connect the product hardware to the power supply and the "USB to 485" tool, and connect the
"USB to 485" tool to the computer USB, as shown in Figure 4-7 below.
32
Copyright ©2012–2021，Chengdu Ebyte Electronic Technology Co.,Ltd.