Power Connection; Ethernet Connection - ZKTeco F18 Quick Start Manual

9 Power Connection

Recommended power supply:
1 12V ± 10%, at least 500mA. )
2) To share the power with other devices, use a power supply with higher current ratings.

10 Ethernet Connection

IP address: 192.168. .210
Subnet mask: 255.255.255.0
Press M/OK on the initial interface. Select COMM. and press M/OK. Then, select Ethernet
on the Comm. Interface, press M/OK to set the IP address and gateway of the device.
Note: The IP address should be able to communicate with the ZKBioAccess IVS server,
preferably in the same network segment with the server address.
12V
GND
1
1
2
3
4
RJ 45
5
6
7
8
IP address: 192.168. .130
Subnet mask: 255.255.255.0
5
12V
DC
GND
1