Wiring Diagram - ZKTeco F18 Quick Start Manual

2 Installation of Wall-mount
Before the installation, please connect the cables to the connectors.
1) Fix back plate to the wall.
2) Mount the device on the back plate.
3) Secure the device and back plate.
3 Cautions
1) Power cable is connected after other wirings, and shut down the power firstly, when
making some necessary checking.
2) We recommend that use the DC 12V/3A power supply.
3) Please read the terminals description carefully and wiring by rule strictly.
4) Please connect the GND before other wirings especially under the serious electrostatic
environment.
5) Do not install the device in a place subject to direct sunlight, humidity or dust.

4 Wiring Diagram

Server
U Disk
TCP/IP
Door
Sensor
Lock
Door Exit Button
2
Door Bell
RS485 Reader
Alarm
Wiegand Card
Reader