Ewarm Toolchain; Figure 6. Iar Embedded Workbench Ide; Figure 7. Ewarm Project Successfully Compiled - ST STM32 User Manual

UM1727
4.1.1

EWARM toolchain

The following procedure explains how to compile, link and execute an existing EWARM
project.
1. Open IAR Embedded Workbench for ARM (EWARM).
of the windows referred to in this document:
2. In the File menu, select Open and click Workspace to display the Open Workspace
dialog box. Browse to select either an example or demonstration or template
workspace file and click Open to launch it in the Project window.
3. In the Project menu, select Rebuild All to compile the project.
4. If the project is successfully compiled,
To change the project settings (Include and preprocessor defines), go through the
following project options:
–
–

Figure 6. IAR Embedded Workbench IDE

Figure 7. EWARM project successfully compiled

For Include directories:
Project>Options...>C/C++ compiler>
For pre-processor defines:
Project>Options...C/C++ compiler>pre-processor>
DocID025840 Rev 5
Figure 6
Figure 7 is displayed.
Firmware package
shows the basic names
9/22
21