Firmware Package; Executing And Debugging Firmware Using Software Toolchains; Figure 5. Package Contents - ST STM32 User Manual

Firmware package

4 Firmware package
The STM32 Nucleo examples, applications and demonstration are provided in one single
.zip file. The extraction of the .zip file generates one folder, STM32 Nucleo_FW_VX.Y.Z,
which contains the following subfolders (see
•
Template project is a pre-configured project with empty main function to be
customized by the user. This is helpful to start creating an application based on the
peripherals drivers.
•
Example project includes toolchain projects for each peripheral example ready to be
run.
•
Applications includes set of applications ready to be run.
•
Demonstration includes the demonstration firmware ready to be run.
4.1 Executing and debugging firmware using software
toolchains
The steps below can be applied to an already existing example, demonstration or template
project available from STM32_Nucleo_FW_VX.Y.Z firmware at the
First of all, the user must read the firmware/readme.txt file, which contains the firmware
description and hardware/software requirements.
8/22
Figure

Figure 5. Package contents

DocID025840 Rev 5
5).
www.st.com
UM1727
website.