Setting Up The Base License - Nortel 2050 Installation Manual

Tps 3d sensor and defense center
Hide thumbs Also See for 2050:
Table of Contents

Advertisement

N
TPS 3D S
ORTEL
ENSOR AND
Setting
Management Interface
and Netmask
Default Network
Gateway
Hostname
IMPORTANT!
If you change the hostname, the new name is not reflected in
the syslog until after you reboot the 3D Sensor. Domain The fully qualified
domain name where the 3D Sensor resides. Primary DNS Server The IP
address of your DNS server for the network where the 3D Sensor resides.
Secondary DNS Server A secondary DNS server's IP address.
2. By default, the 3D Sensor is configured to connect directly to the Internet. If
the 3D Sensor is not directly connected to the Internet, you can identify a
proxy server to be used when downloading updates and rules. Select Manual
proxy configuration and enter the IP address or fully qualified domain name of
your proxy server in the HTTP Proxy field and the port in the Port field.
3. You have two options:
If you made any changes to the network settings or proxy configuration,
click Reconfigure. The configuration is changed based on your settings.
If necessary, you can log in again with the admin account and continue
with "Setting Up the Base License."
If you are using DHCP to specify your network settings, click Skip
Configuration. Your settings are saved and you can continue with

"Setting Up the Base License."

IMPORTANT!
If you restored your appliance to factory specifications, but you
were able to retain your network settings and license file, you can use the
Restore Saved Settings option to refresh the page with your saved network
settings if you make an error on the page.
Setting up the base license
The top of the Manage License page includes a unique license key that you must
use to request a license file for your 3D Sensor. Each appliance has its own
license key and requires its own license file. The process for obtaining the license
key requires a host with a web browser that can access the Internet.
D
C
I
EFENSE
ENTER
NSTALLATION
Description
The IP address and network mask for the
management interface.
The IP address of the gateway device for your
network.
The DNS-resolvable name for the 3D Sensor
G
R
4.7.0
UIDE
ELEASE
Chapter 2: Installation
3D SENSOR 2x50/2x70
38
PAGE

Advertisement

Table of Contents
loading

This manual is also suitable for:

207021502170

Table of Contents