Table of Contents
Advertisement
Chapter 4: BIOS Setup
USB Configuration
This section is used to configure USB devices.
BIOS SETUP UTILITY
Advanced
USB Configuration
USB Devices:
1 Mouse, 1 Hub
Legacy USB Support
[Enabled]
EHCI Hand-off
[Enabled
Device Reset Timeout
[20 Sec]
Version 2.00.1201. Copyright (C) 2009 American Megatrends, Inc.
Legacy USB Support
Enabled Enables legacy USB.
Auto
Disables support for legacy when no USB devices are connect-
ed.
Disabled Keeps USB devices available only for EFI applications.
EHCI Hand-off
This is a workaround for OSes that does not support EHCI hand-off. The
EHCI ownership change should be claimed by the EHCI driver.
Device Reset Timeout
Selects the USB mass storage device start unit command timeout.
Copyright © 2013 NEXCOM International Co., Ltd. All Rights Reserved.
Super IO Configuration
This section is used to configure the I/O functions supported by the on-
board Super I/O chip.
Enables Legacy USB
support. AUTO option
disables legacy support if
no USB devices are
connected. DISABLE
option will keep USB
devices available only for
EFI applications.
Select Screen
→ ←:
Select Item
↑↓:
Enter: Select
+/ -:
Change Opt.
F1:
General Help
F2:
Previous Values
F3:
Optimized Defaults
F4:
Save ESC: Exit
Serial Port 0 Configuration to Serial Port 5 Configuration
Selects the IO/IRQ setting of the I/O devices.
66
BIOS SETUP UTILITY
Advanced
Super IO Configuration
ITE IT8783F
Super IO Chip
Serial Port 0 Configuration
u
Serial Port 1 Configuration
u
Serial Port 2 Configuration
u
Serial Port 3 Configuration
u
Serial Port 4 Configuration
u
Serial Port 5 Configuration
u
Version 2.00.1201. Copyright (C) 2009 American Megatrends, Inc.
Set Parameters of Serial
Port 1 (COMA)
Select Screen
→ ←:
Select Item
↑↓:
Enter: Select
+/ -:
Change Opt.
F1:
General Help
F2:
Previous Values
F3:
Optimized Defaults
F4:
Save ESC: Exit
NISE 3520 Series User Manual
Advertisement
Table of Contents
