Table of Contents
Advertisement
Chapter 4: BIOS Setup
Advanced
The Advanced menu allows you to configure your system for basic opera-
tion. Some entries are defaults required by the system board, while others,
if enabled, will improve the performance of your system or let you set
some features according to your preference.
Setting incorrect field values may cause the system to malfunc-
tion.
BIOS SETUP UTILITY
Main
Advanced
PCIPnP
Legacy OpROM Support
Launch PXE OpROM
[Disabled]
S5 RTC Wake Settings
u
CPU Configuration
u
SATA Configuration
u
Intel IGD SWSCI OpRegion
u
Intel TXT(LT) Configuration
u
USB Configuration
u
Super IO Configuration
u
H/W Monitor
u
Thermal Configuration
u
AMT Configuration
u
Version 2.00.1201. Copyright (C) 2009 American Megatrends, Inc.
Launch PXE OpROM
Enables or disables the boot option for legacy network devices.
S5 RTC Wake Settings
Configures the S5 RTC wake up setting.
Copyright © 2013 NEXCOM International Co., Ltd. All Rights Reserved.
Boot
Security
Chipset
Exit
Enable or Disable Boot
Option for Legacy
Network Devices.
Select Screen
→ ←:
Select Item
↑↓:
Enter: Select
+/ -:
Change Opt.
F1:
General Help
F2:
Previous Values
F3:
Optimized Defaults
F4:
Save ESC: Exit
CPU Configuration
This section is used to configure the CPU. It will also display detected
CPU information.
SATA Configuration
This section is used to configure the SATA drives.
Intel IGD SWSCI OpRegion
Configures the Intel graphics display.
Intel TXT(LT) Configuration
Configures the Intel Trusted Execution technology.
USB Configuration
Configures the USB devices.
Super IO Configuration
This section is used to configure the I/O functions supported by the on-
board Super I/O chip.
H/W Monitor
This section is used to configure the hardware monitoring events such as
temperature, fan speed and voltages.
Thermal Configuration
Configures the intelligent power sharing function.
AMT Configuration
Configures the AMT function.
62
NISE 3520 Series User Manual
Advertisement
Table of Contents
