Table of Contents
Advertisement
Chapter 4: BIOS Setup
Limit CPUID Maximum
The CPUID instruction of some newer CPUs will return a value greater
than 3. The default is Disabled because this problem does not exist in the
Windows series operating systems. If you are using an operating system
other than Windows, this problem may occur. To avoid this problem, en-
able this field to limit the return value to 3 or lesser than 3.
Hardware Prefetcher
Turns on or off the MLC streamer prefetcher.
Adjacent Cache Line Prefetch
Enables or disables the adjacent cache line prefetch.
Intel Virtualization Technology
When this field is set to Enabled, the VMM can utilize the additional hard-
ware capabilities provided by Vanderpool Technology.
Power Technology
Configures the power management features.
TDC Limit
Used to select the TDC limit.
TDP Limit
Used to select the TDP limit.
Copyright © 2013 NEXCOM International Co., Ltd. All Rights Reserved.
SATA Configuration
This section is used to configure the SATA drives.
Advanced
SATA Configuration
SATA Port 1
SATA Port 2
SATA Port 3
SATA Port 4
SATA Mode
Version 2.00.1201. Copyright (C) 2009 American Megatrends, Inc.
SATA Mode
IDE Mode
This option configures the Serial ATA drives as Parallel ATA
storage devices.
AHCI Mode This option allows the Serial ATA devices to use AHCI (Ad-
vanced Host Controller Interface).
RAID Mode
This option allows you to create RAID or Intel Matrix Stor-
age configuration on Serial ATA devices.
64
BIOS SETUP UTILITY
(1) IDE Mode.
(2) AHCI Mode.
Not Present
(3) RAID Mode.
Not Present
Not Present
Not Present
[IDE Mode]
Select Screen
→ ←:
Select Item
↑↓:
Enter: Select
+/ -:
Change Opt.
F1:
General Help
F2:
Previous Values
F3:
Optimized Defaults
F4:
Save ESC: Exit
NISE 3520 Series User Manual
Advertisement
Table of Contents
