Nortel VoIP Gateway Software Manual page 7

p93
INI File Field Name
GWRegistrType
p94
INI File Field Name
SourceEncodeMode
Norstar VoIP Gateway Configuration Guide Addendum – Version 2.1
Valid Range and Description
The Gateway Registration Type defines the encoding type of
the VoIP Gateway's phone numbers that are used when the
VoIP Gateway registers these numbers with a Gatekeeper.
0 – E.164 (default)
1 – H.323 ID
2 – E.164 and H.323-ID
3 – NPI/TON from table
4 – NPI/TON & H.323 ID
Select 0 (E.164) if you want the VoIP Gateway to use e164
encoding and not use the encoding in the Gateway Registration
Table.
Select 1, 2 or 4 (H.323-ID) if you want the VoIP Gateway to add
the H323-ID to the destination information.
Select 3 (NPI/TON from table) if you want the VoIP Gateway to
use the values configured in the Gateway Registration Table.
If GWRegistrType = 1, 2 or 4, you must also configure the
H323IDString.
Valid Range and Description
The Source Number Encoding Type defines the encoding type
of the calling phone number in H.225 setup messages.
0 – E.164 (default)
1 – H.323 ID
2 – E.164 and H.323-ID
3 – NPI/TON from table
4 – NPI/TON & H.323 ID
Select 0 (E.164) if you want the VoIP Gateway to use e164
encoding for the source number and not use the encoding type
defined in the Tel -> IP Source Number manipulation table.
Select 1, 2 or 4 (H.323-ID) is you want the VoIP Gateway to
add the H323-ID to the source information.
Select 3 (NPI/TON from table) if you want the VoIP Gateway to
use the values configured in the Tel -> IP Source Number
manipulation table.
If SourceEncodeMode = 1, 2 or 4, you must also configure the
H323IDString.
7