Table 7 Led Status And Appearance During Operation - Nortel BayStack 100 Setting Up

40 Chapter 5 LEDs: support and diagnostic functions
After initialization is complete, the LEDs indicate status and activity during
operation as shown in

Table 7 LED status and appearance during operation

LED
Power Green
Power Green and
1
2
2
2
3-8
3-8
3-8
3-8
300866-G
Table 7.
Color Appearance
Solid
Solid Green and
Amber Flashing Amber
Green Blinking
Green Solid
Green and Solid Green and
Amber Flashing Amber
Amber Solid
Green Solid
Green Flashing
Green and Solid Green and
Amber Flashing Amber
Red Solid
Note: The "indicated interface" is the interface associated with the
LED's number. This information is available in the main dialog box of the
Setup program. For more information, refer to Using the BayStack Instant
Internet Management Software Version 7.11.
Meaning
Unit has electrical power and is turned on.
Unit is updating flash ROM. DO NOT TURN
OFF until light returns to green.
Unit is operating normally.
Unit is ready to service clients.
Unit is communicating with clients.
Unit is ready to run setup but cannot service
clients (normally occurs before unit has been
configured).
Indicated interface (see Note below) is online.
Indicated interface (see Note below) is dialing
or attempting connection.
Traffic is on the indicated interface.
Indicated interface (see Note below) has
failed.