Replacement Parts/Accessories; Trouble Shooting - Parkside PSSSA 20-Li B2 Instructions Manual

Replacement parts/Accessories

Spare parts and accessories can be obtained at
If you have issues ordering, please use the contact form. If you have any other questions,
contact the "Service-Center" (see page 19).
Position Description
4.1 Saw blade for metal T118A, cordless jigsaw saw
4.2 Saw blade for wood T144D, cordless jigsaw saw
11 Saw blade for metal SE 922 AF, cordless sabre saw
12 Saw blade for wood SE 644D, cordless sabre saw

Trouble shooting

Turn off the appliance and, before doing any servicing, remove the battery.
Risk of electric shock!
Problem
Appliance won't
start
Intermittent
operation
Poor sawing per-
formance
Saw blade quickly
becomes blunt
www.grizzlytools.shop
Possible cause
Battery (14) not inserted
Battery (14) discharged
On/Off switch (3) defective
Motor defective
Internal loose contact
On/Off switch (3) defective
Saw blade (4.1/4.2/
11/12) is blunt
Incorrect sawing speed
Low battery power
Too much pressure applied
Sawing speed too high
Corrective action
Insert battery (14) (Observe the se-
parate operating instructions for the
rechargeable battery and charger)
Recharge battery (14) (Observe the
separate operating instructions for the
rechargeable battery and charger)
Send in to Service Centre for repair
Send in to Service Centre for repair
Insert a new saw blade (4.1/
4.2/11/12)
Adjust sawing speed
Charge the battery (14) (observe
the separate operating instructions
for the battery and charger)
Reduce the pressure
Reduce the sawing speed
GB CY
Order no.
13800403
13800406
13800405
13800404
17