Cleaning; Maintenance; Transport; Storage - Parkside PSSSA 20-Li B2 Instructions Manual

GB CY
out by our Service Centre. Only use
original parts.

Cleaning

The device must not be
sprayed with water or placed
in water. Otherwise there is
a risk of electric shock.
Do not use any cleaning agents or
solvents. This could damage the
device irreparably. Chemical subs-
tances may attack the plastic parts
of the device.
• Keep the ventilation slits, motor housing
and handles of the machine clean.
Use a damp cloth or brush to do this.

Maintenance

The device is maintenance free.

Transport

Before transporting the device, always
remove the battery and the attachment tool
from the device. Always carry the device
by the handle (18).

Storage

• Always store the devices and
accessories:
- dry.
- clean.
- protected against dust.
- out of the reach of children.
• The supplied saw blade can be inser-
ted upright in the case for storage.
• Remove the rechargeable battery from
the device before storing the device
16
(see the separate operating instructions
for the battery and charger).
• The storage temperature for the battery
and the device is between 5 °C and
25 °C. Avoid extreme cold or heat
during storage to ensure the battery
output is not adversely affected.
Disposal and protection
of the environment
Remove the battery from the device and
take the device, battery, accessories and
packaging for environmentally friendly
recycling.
Machines do not belong with
domestic waste.
Directive 2012/19/EU on waste electrical
and electronic equipment: Used electrical
devices must be collected separately for
disposal and recycled in an environmen-
tally sound manner.
Depending on the implementation in na-
tional law, you may have the following
options:
• Return to a shop,
• Hand over to an official collection point,
• Return to the manufacturer/distributor.
We will dispose of any defective devices
that you send to us free of charge.
This does not affect accessories enclosed
with the old devices or tools without any
electrical components.
Take the device to a recycling plant. The
plastic and metal parts used on your de-
vice can be properly sorted according to
materials and grades and efficiently recy-
cled. Please contact our service centre for
more information.