Advertisement
PHASE 2 – INSTALLATION
2.1 ATTACH WALL BRACKETS TO THE END PANELS
2.1.1 • Lift the assembled shelf to the vehicle with care, then put it in place.
• Attach the bracket arm to the panels aligning the brackets head to the structure of the van or truck.
IMPORTANT: For Box Trucks and Ram C/V, make sure that the shelving is securely fastened to the structure
of the truck or van.
For technical support, contact us at 1-800-565-5321
BRACKET HEAD
TOOLS
q Cordless Impact
q 1/2" Socket
HARDWARE USED
4×
-
hand
TiGhTen The bolTs
#90-204 Hex Bolt 5/16" × 3/4"
#98-116 Flat Washer
#94-116 Serrated Nut
S3-RA60-3 Installation Guide | REV. C1 | Page 7
Advertisement
