Required Items - Ranger design S3-RA60-3 Installation Manual

QUICK START GUIDE
Phase 1 - Assembly
q 1.1 Setup...............................................................................................................................................
q 1.2 Shelf Assembly................................................................................................................................
Phase 2 - Installation
q 2.1 Attach Wall Brackets To The End Panels........................................................................................
q 2.2 Mark Holes For Plus Nuts...............................................................................................................
q 2.3 Attach Plus Nut...............................................................................................................................
q 2.4 Attach Shelf Unit To the Floor.........................................................................................................
q 2.5 Attach Wall Brackets.......................................................................................................................

REQUIRED ITEMS

2
PERSONS
q Cordless Impact
q Cordless Drill
q Tape Measure
q Marker
q 1/2" Socket
q 1/2" Drill Bit w/ Drill Collar ( Set at 1/2" )
q 3/8" Driver Bit
q Knife
q Plusnut Tool / Plusnut Gun ( 5/16" )
3 - 4
5 - 6
7
8
9 - 10
11
12