Ranger design S3-RA60-3 Installation Manual page 12

Shelving aluminum, ram c/v, box truck / trailer

PHASE 2 – INSTALLATION

2.5 ATTACH WALL BRACKETS

2.5.1 Aligned the wall brackets to the plus nuts, then install the wall brackets to the structure of the truck or van.

OTE: Tightened the bolts that used to attached the wall bracket to the structure of the truck or van 1

before the bolts that used to attached the wall bracket to the end panel.

IMPORTANT: • For Box Trucks and Ram C/V, make sure that the shelving is securely fastened to the structure

of the truck or van.

• After installation is completed, ensure all bolts are tightened.

For technical support, contact us at 1-800-565-5321

TOOLS

q Cordless Impact

q 1/2" Socket

HARDWARE USED

4×

#90-212 Hex Bolt 5/16" × 1-1/4"

#98-122 Lock Washer

#98-116 Flat Washer

#94-132 5/16" Plusnut

S3-RA60-3 Installation Guide | REV. C1 | Page 12

Table of Contents