Advertisement
PHASE 2 – INSTALLATION
2.1 ATTACH WALL BRACKETS TO THE END PANELS
2.1.1 • Place the assembled bottle holder into the vehicle, at the desired location.
• Attach the bracket arm to the panels aligning the bracket head along the horizontal rim of the vehicle.
For technical support, contact us at 1-800-565-5321
TOOLS
q Cordless Impact
q 1/2" Socket
HARDWARE USED
8×
-
hand
tighten the bolts
HORIZONTAL RIM
#90-208 Hex Bolt
#98-116 Flat Washer
BRACKET HEAD
#98-157 Spacers
#94-116 Serrated Nut
C5-BA13-5 Installation Guide | REV. A1 | Page 8
5/16" × 1"
Advertisement
