Advertisement
2.3.2 How to attach plus nut.
•
usinG plusnuT Gun
STEP: Put the plusnut on the plusnut gun, then attach the plus nut in the hole by turning the gun forward until
the plus nut locks, then remove the gun by turning in reverse.
FORWARD
•
6491
usinG The
plusnuT Tool
NOTE: The hardware used for the 6490 plusnut tool is not included in the fastener bag.
The 6490 plusnut tool can be ordered separately upon demand at no charge.
6491
STEP 1:
Assemble the 6491 plusnut tool with the hardware needed, plus
nut and the 9/16" wrench as shown.
For technical support, contact us at 1-800-565-5321
REVERSE
HARDWARE USED
Flat washer 5/16"
Flat washer 5/16" BS × 7/8" OD
TOOLS
q Cordless Impact
q 1/2" Socket
q 9/16" Wrench
STEP 2:
Attach the plus nut in the hole by turning
the bolt forward using an impact with a
1/2" socket until the plusnut locks, then
remove the bolt by turning the impact in
reverse.
FORWARD
REVERSE
S3-RA60-3 Installation Guide | REV. C1 | Page 10
Advertisement
