Advertisement
PHASE 2 – INSTALLATION
2.2 INSTALLATION
2.2 • Place the cab box raiser between the front seats.
• Adjust the position forward or backward to avoid any seat armrests or mechanical handbrakes levers.
⚠
WARNING: Verify with the vehicle manufacturer before drilling through the floor that no wires, cables
or other items are underneath. Adjust the position of the cab box raiser to avoid any items underneath.
• Use the 5 self-drilling screws to secure the cab box raiser to the floor.
For technical support, contact us at 1-800-565-5321
TOOLS
q Cordless drill
q 3/8" Driver Bit
HARDWARE USED
5×
#92-104 Screw #14 × 1-1/4"
5044 Installation Guide | REV.B2 | Page 5
Advertisement
