Advertisement
PHASE 2 – INSTALLATION
2.4 ATTACH SHELF UNIT TO THE FLOOR
2.4.1 Put the assembled shelf back in place aligning the holes to the plusnuts, then install the
end panels to the plus nuts.
1
mosT vehicle use
spacer when noT over ribs
W/ Spacer
For technical support, contact us at 1-800-565-5321
TOOLS
q Cordless Impact
q 1/2" Socket
HARDWARE USED
4×
W/O Spacer
#90-011 Hex Bolt 5/16" × 1-3/4"
#98-122 Lock Washer
#98-116 Flat Washer
#98-157 Spacers
( QTY = G
)
ap beTween floor and end panel
#94-132 5/16" Plusnut
S3-RA60-3 Installation Guide | REV. C1 | Page 11
Advertisement
