Nortel 1750 Install Manual page 65

10 Replace the top cover on the chassis
a
Hold the cover at an angle, and slide it onto the chassis.
b Insert the four screws that secure the cover to the chassis, and use a
screwdriver to tighten the screws.
11 If the VPN Router 1750 is installed in an equipment rack, mount it in the rack.
a
Set the VPN Router 1750 on the rack-mount shelf in the rack.
b Insert one of the panhead screws through the bottom hole on each side of
the shelf into the hole in the rack and tighten the screws
page 47).
12 Replace the front bezel
a
Hold the bezel by the two handles, and push the bezel onto the chassis.
b Use the screwdriver to tighten the two screws that secure the bezel to the
chassis.
Chapter 3 Installing option cards and DIMMs 65
(Figure 21 on page
(Figure 25 on page 62).
Nortel VPN Router Installation — VPN Router 1750
55).
(Figure 17 on