Additional Equipment; Cables; Hardware For Mounting The Chassis In An Equipment Rack; Site Requirements - Nortel 1750 Install Manual

44 Chapter 2 Installing the Nortel VPN Router 1750 chassis

Additional equipment

You need items that are not included in the VPN Router 1750 shipping container.
Before you begin the installation, ensure that you have all the cables, tools, and
other equipment that you need.

Cables

You need cables that are not included in the VPN Router 1750 shipping container.
For information about which cables are shipped and which ones you can order,
see "Connecting communications cables" on page
proper cables, contact your network administrator.

Hardware for mounting the chassis in an equipment rack

To install the VPN Router 1750 in an equipment rack, you need a Phillips
screwdriver and an equipment rack that meets the following specifications:
•
•
•
If the rack does not have threaded rail holes, you must use the cage nuts shipped
with the VPN Router 1750.

Site requirements

The installation site must provide sufficient free space around the VPN Router
1750 to ensure proper ventilation and access for servicing. For information about
the physical, electrical, and environmental requirements for the VPN Router
1750, see
NN46110-316 02.01
heavy-duty steel construction
width of 19 in. (48.26 cm) and depth of 24 in. (60.96 cm)
Electronic Industries Association (EIA) standard hole-spacing
Appendix A, "Technical specifications," on page
26. If you do not have the
75.