Installing And Replacing Dimms; Figure 25 Replacing The Front Bezel - Nortel 1750 Install Manual

62 Chapter 3 Installing option cards and DIMMs
11 Replace the front bezel

Figure 25 Replacing the front bezel

Installing and replacing DIMMs

The VPN Router 1750 has two slots for dual inline memory modules (DIMM)
(Figure 22 on page
1750 is shipped with one 128 MB DIMM installed. You can upgrade memory in
the gateway by installing a second 128 MB DIMM.
NN46110-316 02.01
b Insert one of the panhead screws through the bottom hole on each side of
the shelf into the hole in the rack and tighten the screws
page 47).
a
Hold the bezel by the two handles, and push the bezel onto the chassis.
b Use a screwdriver, to tighten the two screws that secure the bezel to the
chassis.
Press here
56). Unless you ordered additional memory, the VPN Router
Caution: Use of a memory module not purchased from Nortel can
render void your warranty or your service contract.
(Figure 25).
(Figure 17 on
CS260005E