Mounting The Chassis In The Equipment Rack; Figure 18 Removing The Front Bezel - Nortel 1750 Install Manual

48 Chapter 2 Installing the Nortel VPN Router 1750 chassis

Mounting the chassis in the equipment rack

Nortel recommends that two people install the chassis in the rack.
To install the VPN Router 1750 in the equipment rack:
1
2

Figure 18 Removing the front bezel

NN46110-316 02.01
Set the VPN Router 1750 on the rack-mount shelf.
Remove the front bezel from the VPN Router 1750
a
Use the Phillips screwdriver to turn each of the two screws on the front
bezel a quarter turn counterclockwise.
b Grip the two handles, and firmly pull the bezel toward you to unsnap it
from the chassis.
Caution: Risk of equipment damage
Do not use the piece with the Nortel logo and the LEDs as a handle.
The first several times that you remove the front bezel, the bezel can stick
because the ball studs and socket clips are new.
(Figure 18).
CS260015E