Nortel Vpn Router Installation — Vpn Router; 1000Base-T (1000 Mt) Ethernet Interface Card Leds; Figure 6 Leds On The 1000Base-T (1000 Mt) Ethernet Interface Card; Table 6 Led Indicators On The 1000Base-T (1000 Gt) Ethernet Interface Card - Nortel 1750 Install Manual

The following table describes the LEDs on the 1000BASE-T (1000 GT) Ethernet
interface card.

Table 6 LED indicators on the 1000BASE-T (1000 GT) Ethernet interface card

LED
ACT/LINK
10/100/1000

1000BASE-T (1000 MT) Ethernet interface card LEDs

Figure 6 shows the LEDs on the 1000BASE-T (1000 MT) Ethernet interface card.

Figure 6 LEDs on the 1000BASE-T (1000 MT) Ethernet interface card

Table 7 describes the LEDs on the 1000BASE-T Ethernet interface card.

Table 7 LED indicators on the 1000BASE-T (1000 MT) Ethernet interface card

LED
ACT/LNK
Chapter 1 Cabling the VPN Router and turning the power on 33
Indicator Description
Steady green The port is connected to a valid link partner.
Flashing green The card is sending or receiving network data. The
frequency of the flashes increases with increased
traffic.
Off The card is not sending or receiving data.
Yellow The port is operating at 1000 Mb/s.
Green The port is operating at 100 Mb/s.
Off The port is operating at 10 Mb/s.
10/100/1000
ACT/LNK
Indicator Description
Steady green The port is connected to a valid link partner.
Flashing green The LAN port is sending or receiving network data.
Off The port is not linked to a valid partner.
Nortel VPN Router Installation — VPN Router 1750
11287EA