Figure 1 Rear View Of The Nortel Vpn Router 1750 - Nortel 1750 Install Manual

Chapter 1 Cabling the VPN Router and turning the power on 27
Figure 1 shows the back of the VPN Router 1750. All interface cables and the
power cord attach to the rear of the gateway.

Figure 1 Rear view of the Nortel VPN Router 1750

VPN Router 2750
100 - 240 V~
5 - 3 A
60 - 50 Hz Power
AC Power
receptacle switch
Connect the interface cables to the VPN Router 1750 in this order:
1 Connect the 10/100BASE-TX RJ-45 cables to the built-in 10/100BASE-TX
Ethernet LAN ports on the gateway
2
If you plan to connect a terminal or PC to the gateway, connect the serial
cable that is shipped with the VPN Router 1750 to the serial port
3 Connect all other cables to the ports on the installed interface cards.
If you ordered optional interface cards, connect the cables for these interfaces
to the ports.
LAN0 LAN1
Serial Port
Serial port 10/100
Ethernet
LAN ports
(Figure 1).
Nortel VPN Router Installation — VPN Router 1750
4 PCI slots
1 2 3 4
11424EA
(Figure 1).