Figure 26 Installing And Removing A Dimm - Nortel 1750 Install Manual

64 Chapter 3 Installing option cards and DIMMs
5
6
7
8
9

Figure 26 Installing and removing a DIMM

Alignment keys
NN46110-316 02.01
If you are replacing a DIMM, remove the installed DIMM as follows:
a
Press down the locking lever on either side of the DIMM
b Pull the DIMM up to remove it from the slot.
Press down the locking lever on either side of the slot where you plan to
install the new DIMM
Place the new or replacement DIMM in the slot
Use the alignment keys to properly position the DIMM in the slot.
Press the DIMM firmly into the socket.
Pull up the locking lever on either side of the DIMM to snap it into position.
To remove DIMMs, pull back
locking levers and pull out DIMM.
To install DIMMs, pull back locking
levers and push in DIMM.
(Figure 26).
(Figure
(Figure 26).
Locking lever
CS260019A
26).