Installing the chassis
To install the VPN Router 1750, do one of the following:
•
•
Installing the chassis on a flat surface
If you decide to place the VPN Router 1750 on a flat surface, make sure that the
surface is large enough for the gateway and sturdy enough to support the
combined weight of the VPN Router 1750 and the cables that you attach to it.
The VPN Router 1750 accessory kit includes four rubber feet that can be attached
to the bottom of the gateway.
Figure 15 Placement of rubber feet on the bottom of the chassis
Chapter 2 Installing the Nortel VPN Router 1750 chassis 45
Position the chassis on a flat, sturdy, horizontal surface.
Mount the chassis in a standard equipment rack (see
an equipment rack" on page
Attach feet (4)
46).
Figure 15
shows the placement of these rubber feet.
CS160016A
Nortel VPN Router Installation — VPN Router 1750
"Installing the chassis in