Using the BayStack 650 Wireless LAN Access Point
Setting the WEP Configuration
WEP in the multiple configuration wizard works the same as the WEP in the single
configuration. Refer to
WEP.
To set the WEP (Wired Equivalent Privacy) configuration for the access point in
the multiple configuration wizard:
Choose Configure > Group.
1.
Select the group you want to configure.
2.
The Multiple Configuration Wizard dialog box
Click WEP Configuration.
3.
Click Next.
4.
The WEP Configuration Wizard dialog box opens
Figure 4-18.
Click one of the following:
•
4-40
"Setting
WEP Configuration Dialog Box
Enable or disable shared key authentication (disabled by default).
WEP" on
page 4-19
for more information on
(Figure
4-15) opens.
(Figure
4-18).
203282-B