Checking Access Point Status; Configuring Your Wep Settings; Bootp Table; Table 5-3. Activity Dialog Box Items - Nortel BayStack 650 User Manual

Using the BayStack 650 Wireless LAN Access Point
The number of users for the access point is shown in the lower, right-hand corner.
Table 5-3
Table 5-3.
Item
Suspend
Update
Done

Checking Access Point Status

To view access point status:
• Choose Tools > Access Point.
A list of the access points and their status is displayed. The functions are similar to
instructions described in Chapter 4. Go to
Point" on

Configuring your WEP Settings

Located in the Tools menu, you can open a WEP menu to configure the WEP
settings. The functions are similar to instructions described in Chapter 4. Go to
"Setting

BOOTP Table

Located in the Tools menu, you can open a BOOTP table to configure specific
settings for an access point. Options include adding a BOOTP entry, changing a
BOOTP entry, or setting up an access point so that the an IP address will be
assigned dynamically.
5-10
describes the items in the Activity dialog box.
Activity Dialog Box Items
Description
Suspends the updates. This button changes to Resume when you
suspend the update. Click Resume to continue.
Logs when the device was updated. The Log is shown at the bottom
of the Activity menu ("Updated Wed Sep 09 16:32:10 PDT 1998").
This completes the monitoring of the activity.
page 4-7 for more information on viewing the status of an access point.
WEP" on page 4-19 for more information on setting up WEP.
"Configuring an Individual Access
203282-B