Nortel BayStack 650 User Manual page 99

Click the action that you want to perform
3.
Table 5-1.
Action
Reboot
Turn Adapter Power
Off
Commit Configuration
To Flash
Commit IP
Configuration To
Flash
Set to Factory
Defaults
Upgrade Access Point
Firmware
Upgrade Adapter
Firmware
Click OK.
4.
A confirmation dialog box opens.
Click Yes to confirm the action.
5.
The BayStack AP Manager main window is displayed.
203282-B
Function of the Actions Menu
Description
Reboots a single access point.
Turns off the power to the adapter (PC card) inserted in the
access point.
This option commits all settings to flash, including IP address,
subnet mask, WEP settings, etc. to flash.
This option commits only IP address, subnet mask, and Gateway
addresses settings to flash.
Resets the access point back to its factory default settings.
Use this option to flash upgrade the firmware for the access point.
Obtain the new firmware from Nortel Networks technical support.
Go to Chapter 7, "Diagnostics and
information on obtaining a flash upgrade.
Use this option to flash upgrade the firmware for the adapter
inserted in the access point. Obtain the new firmware from Nortel
Networks technical support. Go to
Troubleshooting" for information on obtaining a flash upgrade.
Managing the Access Point
(Table 5-1).
Troubleshooting" for
Chapter 7, "Diagnostics and
5-5