Figure 4-10. Configuration Dialog Box-Wep Tab - Nortel BayStack 650 User Manual

Using the BayStack 650 Wireless LAN Access Point
Set the WEP features identically on both the PC card and the access point.
In addition, set the same values on both the access point and the wireless LAN for
the encrypt authentication, the encrypt data packets, and the keys. Set one of the
keys to be an "Active Key," and then set the same key number on both the access
point and the wireless LAN.
Figure 4-10.
Note: Remember the changes you made, and then make the identical changes to
any BayStack 660 PC card that is communicating with the access point.
Changes you made in the WEP configuration must be consistent for all
BayStack 660 PC cards on the subnet.
4-20
Configuration Dialog Box—WEP Tab
203282-B