Setting The Wep Configuration; Figure 4-18. Wep Configuration Dialog Box - Nortel BayStack 660 Use Manual

Using the BayStack 660 Wireless LAN Access Point

Setting the WEP Configuration

WEP in the multiple configuration wizard works the same as the WEP in the
single configuration. Refer to
on WEP.
To set the WEP (Wired Equivalent Privacy) configuration for the access point in
the multiple configuration wizard:
Choose Configure > Group.
1.
Select the group you want to configure.
2.
The Multiple Configuration Wizard dialog box
Click WEP Configuration.
3.
Click Next.
4.
The WEP Configuration Wizard dialog box opens
Figure 4-18.
4-40
"Setting WEP" on page 4-19
WEP Configuration Dialog Box
for more information
(Figure 4-15) opens.
(Figure 4-18).
203939-B