Using the BayStack 650 Wireless LAN Access Point
Click Next.
4.
The ESSID dialog box opens.
Enter a new ESSID of up to 32 alphanumeric characters.
5.
Click Next.
6.
A confirmation dialog box opens asking if the changes you made are correct.
Click Finish.
7.
The Configuration Completion dialog box opens
the changes are being processed.
Figure 4-16.
Click OK when the process is complete.
8.
Changing the Subnet Mask and Gateway
To change either the subnet mask or gateway address for the access point:
Choose Configure > Group.
1.
Select the group you want to configure.
2.
The Multiple Configuration Wizard dialog box
Click Subnet Mask and/or Gateway.
3.
4-32
Configuration Completion Dialog Box
(Figure
4-16) showing that
(Figure
4-15) opens.
203282-B