Flash Upgrading The Pc Card In The Access Point - Nortel BayStack 650 User Manual

Flash Upgrading the PC Card in the Access Point

Do the following to upgrade a BayStack 650 PC Card installed in the
BayStack 650 Access Point to the latest version of firmware:
If you have not already done so, install the new version of BayStack AP
1.
Manager (go to
If you have not already done so, flash upgrade the firmware for the
2.
access point (go to
Do the following to flash upgrade your PC card.
3.
From Windows taskbar, select Start > Programs > BayStack AP
4.
Manager (folder) > BayStack AP Manager (.exe file).
The AP Manager menu opens.
From the Actions pull-down menu, select Access Points.
5.
The Access Point dialog box opens.
Click your AP Name listed in the entry field.
6.
Click Actions.
7.
The Actions
Click Upgrade Adapter Firmware.
8.
Click OK.
9.
The Select Upgrade File dialog box opens.
Find the directory that has the firmware upgrade files:
10.
•
•
•
Click Open.
11.
The new firmware is loaded and saved.
203282-B
Chapter 4, "Installing and Starting the AP
"Flash Upgrading the Access
(Figure 7-1) dialog box for a single access point opens.
For the BayStack 650 adapter, select ASP_FWFH.BIN.
For the BayStack 660 OEM adapter (3 LEDs), select ASP_FWDS.BIN.
For the BayStack 660 adapter (2 LEDs), select ASP_FWDR.BIN.
Diagnostics and Troubleshooting
Manager").
Point" on page 7-1).
7-3