Using the BayStack 650 Wireless LAN Access Point
Removing a BOOTP Entry
To remove a BOOTP Entry:
Choose Tools > BOOTP Table.
1.
The BOOTP dialog box
Click the entry that you want to remove.
2.
Click Remove.
3.
The entry is removed from the BOOTP dialog box.
Setting BOOTP Restrictions
The BOOTP restrictions prevent the AP Manager from creating duplicate
IP addresses. You can also use this parameter to limit AP Manager to a particular
set of addresses or to exclude a set of addresses that are already in use.
To restrict a BOOTP entry:
Choose Tools > BOOTP Table.
1.
The BOOTP dialog box
Click Restrictions.
2.
The BOOTP Restrictions dialog box
5-14
(Figure
5-9) opens.
(Figure
5-9) opens.
(Figure
5-12) opens.
203282-B