Adding A Mac Address For The Adapter Card - Nortel BayStack 650 User Manual

Using the BayStack 650 Wireless LAN Access Point
Table 4-6
Table 4-6.
Item
Get List From Access
Point
Add
Import
Remove
Export
Remove All
Set List Size
Allow only authorized
stations
Maximum Concurrent
Users

Adding a MAC Address for the Adapter Card

To add a MAC address for the adapter card list:
In the Adapter tab, click Add.
1.
The Add Station dialog box opens.
Add the MAC address.
2.
Click OK.
3.
The address is displayed on the Authorized Station List
4-16
describes the items on the Access tab.
Access Tab Items
Description
Opens the list of authorized stations.
Adds a MAC address to the adapter list. Go to
Address for the Adapter
adding a MAC address.
Imports a MAC address to the adapter list. Go to
to the Adapter Card
a MAC address.
Click to remove a MAC addresses from the list.
Exports a MAC address to the adapter list. Go to
from the Adapter Card
exporting a MAC address.
Click to remove all MAC addresses from the list.
Sets the Get List Size Adds a MAC address to the adapter list.
Go to "Setting the Adapter List
on setting the Get List Size.
Allows only authorized or any to have access to the access point.
Type the number of users that the access point should support at
any given instant.
Card" on page 4-16
List" on page 4-17 for instruction on importing
List" on page 4-18 for instruction on
Size" on page 4-18
(Figure
"Adding a MAC
for instructions on
"Importing a File
"Exporting a File
for instruction
4-8).
203282-B