Using the BayStack 650 Wireless LAN Access Point
Figure 6-6
Figure 6-6.
Fail-Over Commands
The fail-over commands enable you to configure and to display fail-over
attributes.
The fail-over commands are:
•
fov ether-link-detect—enables or disables Ethernet link detection
•
fov infrstr-ping—enables or disables infrastructure pinging
•
fov ping-target-addr—sets ping target station address
•
fov show—displays fail-over attributes
6-12
shows an example of the encapsulation commands.
Encapsulation Commands Example
203282-B