Ford Bantam 2007 Owner's Manual page 77

Do not connect to the
negative (-) terminal of the
flat battery.
• Make sure that the jump leads
are clear of any moving parts.
To start the engine
• Run the engine of the vehicle
with the booster battery at mod-
erate speed.
• Start the engine of the vehicle
with the flat battery.
• Run both vehicles for a further 3
minutes before disconnecting the
leads.
To disconnect the leads
• To reduce voltage peaks on dis-
connection, switch on the heater
blower (maximum speed) in the
vehicle with the flat battery.
Do not switch on the head-
lights in place of the heater
blower. The peak voltage
could blow the bulbs.
• Disconnect lead 2 (-) first and
then lead 1 (+).
Roadside Emergencies
75
Flat battery
2
1
Booster battery