Ford Bantam 2007 Owner's Manual page 12

Temperature warning light
(If equipped)
If the light flashes, the engine is
overheating. Stop immediately and
switch off the ignition. Determine
the source of the problem once the
engine has cooled down.
Temperature gauge (If equipped)
Indicates the temperature of the
engine coolant. At normal operating
temperature, the needle remains
within the centre section. If the
needle enters the red section, the
engine is overheating. Switch off
the ignition and determine the
source of the problem once the
engine has cooled down.
Never remove the cap from
the coolant reservoir when the
engine is hot. Do not restart
the engine until the problem
has been eliminated.
After switching off the ignition, the
needle remains in its current posi-
tion.
As soon as the ignition is switched
on the actual temperature is indi-
cated again.
Instrumentration
10
Temperature
Warning Light
Temperature gauge