Table of Contents
Advertisement
Front screen defrosting/
demisting
Select maximum temperature, set
the air distribution control to
the blower to its highest speed and
close side and centre vents. After
defrosting/demisting, switch to
or a postion between
to obtain comfortable distribution
of air flow. Temperature control
and the blower can be reduced to a
comfortable setting.
To demist side windows use the
setting above but partially open
side vents and direct airflow
towards the side windows.
Rapid heating of vehicle interior
Set the distribution control to the
footwell position
tre and side vents. Set the tempera-
ture control to maximum warm.
Select a higher blower setting. A
minor air stream flows to the wind-
screen to keep the screen clear.
Suitable position in cold
weather
If the air flow in control position
is not sufficient to demist the win-
dows, select a position between
and
.
Ventilation
Set the air distribution control to
or between
and
blower to any position. Open the
centre and side vents to suit
individual requirements.
Controls and Features
,
and
and close cen-
. Set the
15
Blower switch positions
0
=
1
=
2
=
3
=
4
=
Off
Slow
Low
Medium
High
Hide quick links:
Advertisement
Table of Contents
