Ford Bantam 2007 Owner's Manual page 63

Rear lights
Remove the four rear light
retaining screws and disconnect the
electrical connector.
Brake lights/Tail lights,
Rear direction indicator lights,
Reverse lights.
1. Turn the bolts anticlockwise
and remove them.
2. Turn the socket and bulb
assembly anticlockwise and
remove it.
3. Disconnect the bulb from the
socket.
4. Install the new bulb in the
reverse order of removal.
5. After installation check that the
lights operate correctly.
High-mount brake light.
1. Remove the retaining screws
with a Phillips screwdriver and
then remove the lens.
2. Turn the socket and bulb
assembly anticlockwise and
remove it.
3. Disconnect the bulb from the
socket.
4. Install the new bulb in the
reverse order of removal.
Roadside Emergencies
61
Rear direction indicator lights
1
Brake lights / Tail lights
2
Reverse light
3
1
2
3