Programme Sequence Display - Miele PFD 401 Marine Operating Instructions Manual

Current time
Start at
Finish at
A summary follows, which you must

confirm by pressing
Universal
Start at

12:30

This activates the timer.
Changing the timer
If you want to change the time set for the

timer, first press the  button to return to
the programme view.
Tap the  symbol. You can then enter a

new start or finish time.
09:32
12:30
OK
--:--
OK .
Deleting the timer
Press the Start/Stop button.

Start programme
immediately
You can either delete the timer setting
Delete timer
( ) or delete the timer and start
the programme immediately (
programme immediately
Alternatively, you can tap the  symbol
again in the programme view and delete the
timer via the settings that follow.

Programme sequence display

Once a programme has started, the display
shows the programme name, the name of
the current wash phase and the time left
until the programme is finished.
Universal
Pre-wash 1

Time left

Programme parameters such as the actual
and target temperature can be queried
during a programme sequence.
Tap the  symbol.

Operation
Delete timer
Start
).
1:14
h
45