Networking/Wifi; Wifi Setup; Connection Via Wps - Miele PFD 401 Marine Operating Instructions Manual

Networking/WiFi

Your dishwasher is equipped with an
integrated WiFi module.
You can connect your dishwasher to your
local network in order to use digital
solutions from Miele.
An overview of these digital solutions is
available on the webpage:
https://www.miele.co.uk/p/
Once the dishwasher is connected to your
local network, more menu options are
added to the "Further settings" and
"Networking/WiFi" menu.
Check the settings of your WiFi router,
especially when operating several
machines in the WiFi network.
Make sure that your WiFi network signal
is strong enough at the installation site of
your dishwasher.
Place the dishwasher and the router at a
suitable distance from each other.
The menu is saved under the following input
path.
 Further choices
 Extended settings
 Network/WiFi

WiFi setup

Set up

Network/WiFi
Set up
Select the

menu option.
 Further settings
You can connect your dishwasher to your
network using Via WPS or Via Soft AP.
Which connection method do you
want to use?
WPS

Connection via WPS

You can connect your dishwasher to your
WiFi network using WPS (Wi-Fi Protected
Setup).
Your WiFi router must support WPS.
Which connection method do
When asked

you want to use?
, select

Press the WPS button
on your
Information
router.
Press the WPS button on your
When

router. appears on the display, activate
the WPS function on your router within
2 minutes.
Once the connection has been

Connection successfully
established,
established
will appear on the display.
Confirm the message with OK.
If the connection fails, you have probably
not activated WPS on your router quickly
enough. Repeat the steps above.
Soft AP
WPS
.
OK
71