Cleaning The Machine Front; Cleaning The Wash Cabinet; Cleaning The Door And The Door Seal - Miele PFD 401 Marine Operating Instructions Manual

Cleaning and care

Cleaning the machine front

To clean the stainless steel front, use a

damp cloth with a solution of washing-up
liquid and hot water, or with a non-
abrasive cleaning agent for use on
stainless steel.
To help prevent re-soiling (fingerprints, etc.),
a suitable stainless steel care product can
be used after cleaning.
 Damage to the surfaces.
Cleaning agents containing ammonia and
thinners can damage surfaces.
Avoid these products when cleaning.
 Damage to the dishwasher caused by
ingress of water.
Do not clean the dishwasher or its
immediate vicinity with a hose or a
pressure washer.
Make sure that water does not enter the
dishwasher when it is being cleaned.
76

Cleaning the wash cabinet

The wash cabinet is largely self-cleaning,
provided that the correct amount of
cleaning agent is always used.
If, despite this, limescale or grease deposits
accumulate in the cabinet, these can be
removed with a proprietary dishwasher
cleaner (available from Miele).
Cleaning the door and the door
seal
Wipe the door seal and the area beneath

the door regularly with a damp cloth to
remove food deposits.
Wipe off any food or drink residues that

may have dripped onto the sides and
hinges of the dishwasher door.
With freestanding machines that have a

plinth panel, remove spillages of food and
drink from the channel that runs below the
door.
 Risk of cutting yourself.
There is a risk of cutting yourself.
Be cautious of sharp edges when
cleaning.
These surfaces are outside the wash
cabinet. Water from the spray jets does not
reach them. As a result, mould can develop
here.