Blocking Further Settings Or Making Them Available; Changing A Pin Code - Miele PFD 401 Marine Operating Instructions Manual

 Further settings
Blocking further settings or making them
available
Access to the menu can be protected by a
PIN code or can be made available to all
users. A new code can also be assigned.
The menu is saved under the following input
path.
 Further choices
 Extended settings
 PIN code
Change PIN code

PIN code
Release further settings
Change PIN code
-
Assign a new PIN code (see "Changing a
PIN code").
- Release further setts.
The  Extended settings
available to all users.
Select an option.

70

Changing a PIN code

Assign a new PIN code by selecting the
Change PIN code



menu is
There are 3 boxes above the numerical
value. Once a number has been entered and
confirmed by pressing OK, the box is filled.
This allows you to keep track of which
number of the PIN code you are currently
entering.
You can cancel the process at any time by
pressing the  button.


If both entries match, the old PIN code is
replaced by the new code.
If the entries do not match, a corresponding
message is shown on the display and the
old PIN code remains in use.
When a new PIN code is entered, the old
PIN code is overwritten and is
permanently deleted. It is therefore not
possible to reinstate the old code.
If a PIN code is lost, a new code must be
issued by the Miele Customer Service
Department.
option in the menu.
Follow the instructions on the display and
start by entering the current PIN code.


5
PIN code

Use the  and  arrow buttons to set
relevant numerical values.
Confirm each digit individually by pressing
OK
.
Then enter the new code.
Confirm the new PIN code by entering it
again.
OK