Table of Contents
Advertisement
5
Information About the Sensor
0000001879_002_EN_30-09-2020
Each configured sensor, in scan direction, has defined 3D areas within
which a measuring object can be scanned. In the following, such a 3D area
is called "measuring volume" (MV).
5.1
Sensor Configurations
Measuring Areas T-SCAN hawk
Measuring Mode
Suggested max. part size
[mm]
Measuring area in the center
of the measuring volume (L x
W) [mm]
Average distance between
reference points [mm]
The measuring distance for the T-SCAN hawk depends on the preferred
resolution and the measuring mode.
With the T-SCAN hawk, you can choose from different measuring modes.
This results in different measuring volumes.
Fig. 2: T-SCAN hawk measuring volumes, incl. photogrammetry measuring
area
Blue Lasers
Red Lasers
300
1000
170 x 170
410 x 350
50
120
Photogram‐
metry
4000
1200 x 900
120
Page 10 (19)
Advertisement
Table of Contents
