Staubli 16BL-PP Assembly Instructions Manual

Staubli 16BL-PP Assembly Instructions Manual

Panel receptacle with threaded stud

Advertisement

Quick Links

MA409 (de_en)
Montageanleitung
Stecker 16BL-PP
Einbaudose mit Gewindeanschluss M16
Inhalt
Sicherheitshinweise ���������������������������������������������������������������� �2-3
Erforderliches Werkzeug ��������������������������������������������������������������4
Steckermontage an Fronttafel ������������������������������������������������������4
Anschluss ������������������������������������������������������������������������������������5
Steckverbindermontage mit Winkeladapter WA-ID/S21 ���������������5
Montage des Schutzdeckels ��������������������������������������������������������6
Montage des Mikroschalters MSW-16BL-PP �������������������������������7
Funktionskontrolle des Mikroschalters ������������������������������������������7
Montage des Schtuzdeckels 16BL-CP/PC ����������������������������������7
Kodierung ������������������������������������������������������������������������������������8
Steckvorgang / Prüfvorgang / Trennvorgang ��������������������������������9
Verriegelungsstift �����������������������������������������������������������������������10
Notizen �������������������������������������������������������������������������������� 11-12
16BL-PP/ET/C...
E470532
MA409 (de_en)
Assembly instructions
Plug 16BL-PP
Panel receptacle with threaded stud M16
Content
Safety Instructions ������������������������������������������������������������������� 2-3
Tools required ������������������������������������������������������������������������������4
Termination ����������������������������������������������������������������������������������5
Connector assembly in angled adapter WA-ID/S21 ���������������������5
Protective cover assembly �����������������������������������������������������������6
Installation of microswitch MSW-16BL-PP �����������������������������������7
Protective cover application 16BL-CP/PC ������������������������������������7
Coding ����������������������������������������������������������������������������������������8
Plugging, test and unplugging procedures �����������������������������������9
Locking pin ��������������������������������������������������������������������������������10
Notes ���������������������������������������������������������������������������������� 11-12
Zubehör
Accessories
MSW-16BL-PP
14.0106
WA-ID/S21
14.0050
16BL-CP/PC
15.5882
PL-PC-1021SET
14.5252-*
PL-PC-1021SET-CN
14.5253-*
1 / 12

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the 16BL-PP and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Summary of Contents for Staubli 16BL-PP

  • Page 1: Table Of Contents

    Steckverbindermontage mit Winkeladapter WA-ID/S21 ���������������5 Connector assembly in angled adapter WA-ID/S21 ���������������������5 Montage des Schutzdeckels ��������������������������������������������������������6 Protective cover assembly �����������������������������������������������������������6 Montage des Mikroschalters MSW-16BL-PP �������������������������������7 Installation of microswitch MSW-16BL-PP �����������������������������������7 Funktionskontrolle des Mikroschalters ������������������������������������������7 Functional check of microswitch ��������������������������������������������������7 Montage des Schtuzdeckels 16BL-CP/PC ����������������������������������7 Protective cover application 16BL-CP/PC ������������������������������������7...
  • Page 2: Sicherheitshinweise

    Sicherheitshinweise Safety instructions Die Montage und Installation der Produkte darf ausschließlich The products may be assembled and installed by electrically durch Elektrofachkräfte oder elektrotechnisch unterwiesene Per- skilled or instructed personnel duly observing all applicable safety sonen unter Berücksichtigung aller anwendbaren gesetzlichen regulations�...
  • Page 3 The crimp contacts of these devices are suitable for factory and field wiring� The power inlet 16BL-PP is for mounting on panel and is provided with stud and nut terminal and optional protective cover DE 16N, optional angled adapter WA-ID/S21 and optional accessory switch MSW-16BL-PP indicating the locking status, rated 5 A, 125/250 VAC, 1 A, 48 VDC, for use with prepared conductors, as example ring cable lugs�...
  • Page 4: Erforderliches Werkzeug

    Farbring (ill. 6) (ill. 6) Coloured ring Falls verwendet, den Farbring FR21 auf If used, stick the coloured ring FR21 on 16BL-PP/ET/C��� aufkleben� 16BL-PP/ET/C��� Achtung Attention Vor dem Kleben: Before bonding: 1. Oberfläche reinigen (trocken, sauber und frei von 1.
  • Page 5: Anschluss

    (ill. 7) (ill. 7) max. Panel Dicke: 10 mm Dose von vorne in die Fronttafel stecken Insert plug into front panel� max panel thickness: 10 mm und so ausrichten, dass die Markierung Align plug so that marking C is visible C beim Steckvorgang gut sichtbar ist�...
  • Page 6: Montage Des Schutzdeckels

    Beim Einsatz > 2000 m über Mee- For use > 2000 m above see level, resniveau bitte Stäubli kontaktieren� please contact Stäubli� Montage des Schutzdeckels Protective cover assembly PL-PC-1021SET (-CN) PL-PC-1021SET (-CN) Hinweis: Note: Siehe Montageanleitung MA036 See assembly instructions MA036 www�staubli�com/electrical www�staubli�com/electrical 6 / 12...
  • Page 7: Montage Des Mikroschalters Msw-16Bl-Pp �������������������������������7 Installation Of Microswitch Msw-16Bl

    Montage des Mikroschalters Installation of microswitch MSW-16BL-PP MSW-16BL-PP (ill. 16) (ill. 16) Mikroschalter mit PT-Schrauben auf den Fasten microswitch to plug with PT- Stecker anschrauben� screw� The microswitch contact is a Der Mikroschalter-Kontakt mit Um- changeover contact� Type of connec- schaltkontakt hat 3 Steckanschlüsse...
  • Page 8: Kodierung

    Kodierung Coding Mechanische Kodierung Mechanical coding Es gibt max� 7 mechanische Kodiermöglichkeiten, gekennzeich- There is a maximum of 7 mechanical coding possibilities, net mit C1 bis C7� designated from C1 to C7� Folgende Kodierzuordnung wird zur Sicherstellung der Auswech- The following coding is recommended to safeguard the inter- selbarkeit empfohlen: changeability: Bezeichnung...
  • Page 9: Steckvorgang / Prüfvorgang / Trennvorgang

    Durch Zug prüfen, ob die Verbindung in dieser Position mecha- engaged� nisch nicht mehr getrennt werden kann� By attempting to simply pull the connectors apart, test that the connection in this position can no longer be mechanically separated� 16BL-PP/ET/C... 16BL-PP/ET/C... Markierung / Marking 45° 16BL-CS/... 16BL-CS/...
  • Page 10: Verriegelungsstift

    (ill. 20) (ill. 20) Zum Stecken und Trennen muss der Verriegelungsstift an der For plugging and unplugging, the locking pin on 16BL-PP must 16BL-PP auf Position „offen“ sein� be in the “open” position� Verriegelungsstift auf “geschlossen” verhindert ein ungewolltes In the “closed”...
  • Page 11: Notizen

    Notizen / Notes: 11 / 12...
  • Page 12: Notes

    Notizen / Notes: Hersteller/Producer: Stäubli Electrical Connectors AG Stockbrunnenrain 8 4123 Allschwil/Switzerland Tel. +41 61 306 55 55 +41 61 306 55 56 mail ec.ch@staubli.com www.staubli.com/electrical 12 / 12...

Table of Contents